#Polk audio audio bar speaker terminals upgrade

If you're not quite ready to embrace the benefits of a complete surround sound system, you can step up with a more high-performance sound bar. However many speakers you end up with, you'll have the opportunity to experiment with situating them in different spots around the room to achieve the best possible acoustics. While some opt for maximizing coverage in their listening area with seven speakers and a pair of subwoofers, you can also conserve space with five speakers and a single subwoofer. Matching up speakers with complementary timbres will result in optimal blending across multiple channels. Look for speakers designed with clear sound reproduction as the priority and minimal harmonic distortion. Types of speakers that best suit your listening environment and preferences. When you're putting together a surround sound system, you have the freedom to select the number and With the right AV receiver and speakers, you can achieve playback that fills your listening area with rich, deep sound. A powerful system plunges the listener into a remarkably detailed audio environment with plenty of room for customization. There are many advantages to a surround sound home audio system that make it the ideal choice for a serious audiophile or home theater enthusiast.

#Polk audio audio bar speaker terminals upgrade

However, if you're relocating to a larger space or just itching for a more immersive sound, it might be time to upgrade to a full surround sound system.Įxploring the possibilities of surround speakers You can easily enhance the audio experience of your favorite entertainment by placing one above or below your television. Hope this helps, stick around here, you will learn a lot and end up wanting to spend lots more money on your equipment!:eek::DĮxactly, and my Onkyo 805 does just that.A quality sound bar can be a great choice for your home audio setup, especially if you have limited space. You mention only having one set of connections on the receiver for the fronts, and what some receivers will allow you to do is use the rear surround channel to bi-amp the fronts, but you have to change the settings in the receiver's setup so it knows you are doing that. Just don't bi-amp and leave the jumpers in place! Not all receivers support bi-amping, so it would be useful to know what receiver you have before commenting further whether you have that option. The piece of metal that JK mentions above is the 'jumper', and carries the signal from one set of posts to the other if you are just running one set of cable to the speakers. The tweeter is wired internally to one set of posts and the Mid/woof is wired internally to the other set. You'll see a piece of metal between the red's and blacks and you'll leave that there. Ok, going back to drop the speaker wire down the walls where the FXi3's are mounted now, then I'm ready to move everything back into place and plug all the new stuff in!! Whoo whoooo. You can also bi-wire which I'm not sure what the benefit is, but I'm not doing it so I haven't focused on learning what it is. The 805 is just set up to bi-amp already. Otherwise, if you have separate amps, you'd so the same thing using 1 channel for the highs and one for the lows. Of course I'll have to tell my receiver that I'm bi-amping and it'll make some changes. It's supposed to provide much better highs and lows. Next I'll connect the rear surround connection from the receiver to the lower set of connections on the speaker the low tone part of the speaker so that one channel will be dedicated to driving the lows.ĭoing that, I'll need to remove the metal jumper so each is fed the dedicated channel.

That means I'm going to connect the front speaker connection from the receiver to the top set of connections on the speaker the high tone part of the speaker so that one channel will be dedicated to driving the highs.

In my case (Onkyo 805 that allows for it if you're not setting up a 7.1 system, you connect the rear surrounds and front mains from the receiver, the front speakers) If you're receiver will let you, as mine will, and I'm in the middle of doing today, I'm going to bi-amp. They are there however, if you want to bi-amp. I assume the R's have a red/black pair on the one on top of the other. If you want to use them 'normally', just connect your speaker wire to one or the other of the red/black sets.